隔離劑
隔離劑應用于模具成型或加工的產品，在制作過程中，使用隔離劑，將制造的產品和模具隔離開，方便后面產品從模具中順利取出，并不破壞模具和產品。在橡膠制品加工時，就用到隔離劑，將模具和橡膠隔離性，防止橡膠制品或半成品表面與模具粘結在一起。
我公司現研發出應用于乳膠凝固劑中的隔離劑，具有良好的流動性、潤滑性；較強的耐沖擊力；耐高溫；冷卻效果好；好脫模，容易從模具中取下制品等優點和特點。且相較于其他隔離劑配比高，稀釋比例高，性價比更高。具體規格型號參數如下
| 物化指標產品規格 | 白度（%） | 粒度 （2μm） | PH值 | 酸不溶物（%） | 固含 % | 325目篩余物（%） |
| JN-GL90 | ≥98.0 | ≥95 | 8-12 | ≤0.15 | 70±1
| ≤0.005 |
制備：
步驟1、稱取定量硝酸鈣溶液和70%納米鈣，加水稀釋至指定濃度。
步驟2、加入10%平平加O溶液，攪拌均勻。
步驟3、凝固劑配制時，硝酸鈣、70%納米鈣、 10%平平加O，根據生產情況可適當調整。
硝酸鈣(或氯化鈣)溶液制備：
步驟1、溶解：將固體200Kg硝酸鈣倒入200L的塑料桶加滿水攪拌至完全溶解。
備注：本產品固含70%，客戶要根據之前的添加量，折干計進行配比增減。本產品配方僅供參考，具體根據實際為準。
Isolation agent
The isolating agent is applied to the products formed or processed by the mold. In the production process, the isolating agent is used to separate the manufactured products from the mold, so that the products can be removed smoothly from the mold without damaging the mold and the products. In the processing of rubber products, isolation agent is used to isolate the mold and rubber to prevent the surface of rubber products or semi-finished products from bonding with the mold.
Our company has developed the isolation agent used in latex coagulant, with good fluidity and lubricity; Strong impact resistance; High temperature resistant; Good cooling effect; Good demoulding, easy to remove products from the mold and other advantages and characteristics. Compared with other isolating agents, the ratio is higher, the dilution ratio is higher, and the cost performance is higher.
Specific specifications, models and parameters are as follows:
Product
specification | whiteness
（%） | Particle
size（-2um） | PH | The acid
insolubles
（%） | Solid
content
（%） | 325 mesh
sieve residue（%） |
| JN-GL90 | ≥98.0 | ≥95 | 8-12 | ≤0.15 | 70±1
| ≤0.005 |
Preparation:
Step 1. Weigh the quantitative calcium nitrate solution and 70% nanometer calcium and dilute it with water to the specified concentration.
Step 2. Add 10% Pingpingjia O solution and stir well.
Step 3 When preparing the coagulant, calcium nitrate, 70% nanometer calcium and 10% Pingping plus O can be adjusted appropriately according to the production situation.
Calcium nitrate (or calcium chloride) solution preparation:
Step 1. Dissolve: Pour the solid 200Kg calcium nitrate into a 200L plastic bucket filled with water and stir until it is completely dissolved.
Note: This product contains 70% solid, the customer should increase or decrease the ratio according to the previous amount of adding, drying meter. This product formula for reference only, according to the actual prevail.
